Do you have
Plexidor® pet doors for a wall?
The best pet door for a wall is
the Plexidor® Performance Pet Door . It is a
construction grade pet door and has a good weather seal. You can put most pet
doors through walls.
Do you have
Plexidor® pet doors for windows?
No. The Plexidors® are designed to go through a wall or house door. The
can be put through any type of house door, wood, steel, fiberglass, etc. and any type of wall, 2x4 stud walls, 2x6 stud walls, brick veneer walls, block walls, and yes even 24" walls of southern Arizona. Enter your zip
code or postal code above to locate a dealer near you. You may install the door your self or the local dealer can install the pet door for you.
Do you make
Plexidor® pet doors for french
Yes and No. The Plexidor®pet doors can be installed in french doors. If the pane of glass are
individual panes you can remove them as needed. But, if the door has
one large sheet of glass with a muton
grill on top, you can not cut this glass. It is tempered and will break into many small pieces if you try to cut it. Another option is to replace the door slab with one that is glass above and door material below.
difficult to train a pet to use a Plexidor® pet door?
Most cats and dogs learn how to use a Plexidor® pet door in 2 seconds to 2
weeks. Do not push the pet through the Plexidor®. Try and coax
your pet through with a treat.
Can my cat use a Plexidor® that is large for my dog?
Yes, most cats will use
up to a large Plexidor®. If you have a medium size dog, you may need to
go up in size to a large to keep the top of the door high enough for the dog
(shoulder height) and to bottom low enough for the cat (approximately 5" off the
Can I paint my Plexidor®?
Yes, just sand the frame, prime and
paint. But, try our white. It is a baked on finish like your
How do I measure my pet?
The opening of the pet door should be a slightly larger than your pet.
- Opening width - Measure the widest part of your pet.
- Opening height - Measure from the top of the shoulders to the chest just behind the front legs.
Pets duck their heads as they push open their doggie door or cat door and step through it so ideally you should install the pet door with the top of the opening just above your pet's shoulders.
- Do a cardboard test to ensure correct size for your pet. Using the opening measurement size, cut a hole
in a piece of cardboard and see if your pet can pass through easily.
- Or, do a door test. Wedge open a house door the opening width and blook off the opening height (starting a your pet's shoulders) and call your pet through.